How do I setup my MSRM US302 WiFi extender?

A reputable company that makes Wi-Fi routers and AP Extender Setup is MSRM US302 Extender Setup. The MSRM US302 Extender setup offers an excellent coverage area and an optimised internet connection. It is 172 metres in length. By using the “Dual-Rotation” antennas, this Wi-Fi range extender removes any impediments such as walls, mobile devices, and other similar objects. The 802.11b/g/n feature provides you with fast, reliable, and stable speeds.

Read More: Limited time offer: Renting laptops near me now and get 25% off your rental fee!”

MSRM US302 Web Browser Setup with a Wi-Fi Extender | Ap.Setup | MSRM US302:

Make sure your home has an internet connection that works. Make sure the router is connected to a power source as well.

  • Turn the MSRM us302 extender “ON” by connecting it into a Wi-Fi router’s power outlet.
  • To join a Wi-Fi network that says “MSRM US302,” click on Wi-Fi and then use your phone, laptop, or other mobile device to search for and locate one. It won’t have any safety precautions or a password at first.
  • Select “Repeater Mode” from the menu. Now, select the Wi-Fi network from the Wi-Fi network list that you wish to extend to your present Wi-Fi router Logo Design Dubai.
  • There are now two options: either use the same router ID setup or create a new name (SSID) and password.
  • There are now two options: either use the same router ID setup or create a new name (SSID) and password. Choose the one you want.
  • You have to set up the MSRM extender network on the following tab.Enter a password and a name (SSID) when prompted. For the 2.4GHz and 5GHz networks, you will need to repeat this procedure twice, in accordance. (the password must be the same as that of the router).

Note: If you need any help regarding your msrm wifi extender so contact our technician or visit the official website that is ap.setup.

MSRM US302 Extender With WPS Setup:

Ensure that a power supply is connected to both your main Wi-Fi router and the MSRM US302 Wi-Fi range extender. Ensure that they are close enough to be found.

Press the “WPS” button on the WiFi router’s back. Press the “WPS” button on the MSRM range extender below for two minutes.

Your main router’s WiFi network can be immediately connected to by the MSRM extender.

MSRM US302: Confirm the Firmware

  • Ensure that your extender is linked and powered on by pressing “ON.”
  • Turn on Wi-Fi and look for and join the “MSRM-xxx” Wi-Fi network using your phone, notebook, or other mobile device.
  • Open a new window on the same computer, and then type “” into the address bar of the browser. You will now be taken to a page where you must input a password and an administrative username. Enter your passwords.
  • Go to Administration Device Update from the ‘home screen’. Press the “Upgrade the firmware” button under the Automatic Updates menu. Make sure your internet link is steady so you can update the firmware if necessary.

The MSRM US302 resets:

  • Before that extension is turned “ON,” press and hold the reset button on the system’s side with a pin for roughly 10 seconds.
  • You may recall that the LED sometimes turns red after a while, indicating that the device is restarting.
  • The extender’s power LED only makes sure that it is completely reset for about 30 seconds when it restarts.
  • Methods 2
  • Ensure that your PC, laptop, or smartphone is linked to the MSRM extender’s Wi-Fi network.
  • Open the browser on the same device and type “” or “AP.Setup” into the address bar.
  • Access the administrative “Username” and “Password” after entering the first page.On the setup button for “Home Page,” select “Management.” Select “System” from the drop-down menu, then select “Factory Defaults” from the menu.

Author Bio

Websitedesigner is providing the best freelance web designer abu dhabi In a very Affordable price so everyone can be afforded.

Leave a Reply

Your email address will not be published. Required fields are marked *